Mikrotron EOSENS GE CAMERA Specifikace Strana 15

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 37
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 14
Configuration EoSens GE Camera Manual
6.2 Image size and position
6.2.1 Setting the ROI, commands: OffsetX, OffsetY, Width and Height
Image size and position within the sensor is defined by four parameters:
Command Description Value
OffsetX Address of first pixel (x-start) 0…4F8
hex (modulo 24)
OffsetY Address of first line (y-start) 0…3FE
hex
Width X-width (x-width) 8…500
hex (modulo 8)
Height Y-height (y-height) 1…400
hex
6.2.2 Setting multiple ROI’s, commands: MultiROICount, MultiROIOffset
Commands: MultiROI1OffsetX 0…4f8
hex
MultiROI1OffsetY 0…3fe
hex
MultiROI2OffsetX 0…4f8
hex
MultiROI2OffsetY 0…3fe
hex
MultiROI3OffsetX 0…4f8
hex
MultiROI3OffsetY 0…3fe
hex
MultiROICount 0…3 number of ROI windows to activate
Description: With this command multiple ROI’s are activated and controlled. EoSens
allows to simultaneously choose up to four individual ROI’s within the
complete frame range. Thus, multiple objects can be captured independ-
ently at the same time. Normally only one window is active. This is the
default of MultiROICount = 0. With MultiROICount >=1 up to 3 additional
windows can be activated. So a total of maximal 4 windows can be active.
Each window can have its own start address. The size of the additional
windows is the same as the main ROI.
Note: In contrast to normal mode with x-start modulo of 24 in multiple ROI mode
the x-start modulo is 48 beginning with 0 or 24 depending on the main
ROI. If multiple ROI’s are active also the main ROI is locked to modulo 48.
Start addresses not fitting this modulo will be automatically rounded by the
camera and can be checked with the read command. Note also that when
changing the size of the main ROI the additional ROI’s will be changed
automatically. So take care that these ROI’s will fit into the sensor size.
Also the maximum framerate will decrease if multiple windows are active.
Remark: This mode can not be combined with ReverseX/Y mode or Decimation
mode.
Zobrazit stránku 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 36 37

Komentáře k této Příručce

Žádné komentáře